DVR: Connect all cameras, monitor, mouse, router and power.

NVR: Connect all cameras, monitor, mouse, router and power.

When unit boots, follow initial settings:

1. Choose language and region
2. Set time, timezone, format and DST/NTP.
3. Choose a new recorder password and Security Question if required.
4. Format the hard drive.

Run Wizard Setup:

1. Enable DHCP (Obtain IP automatically + Obtain DNS Automatically)
2. Add camera (applies to adding a camera via PoE switch)
3. Choose recording schedule (default is 24x7+Motion+Sensor+AI)
4. Enable NAT (in order to add to mobile phone)
5. Enable cloud upgrade (automatic firmware update)