1. Connect both access points to a network switch via their PoE injectors using Cat5

2. Connect a windows laptop to the same switch via cat5

3. To change laptop IP, right click network icon and select “Open Network & Internet Settings”.

4. Select “Change Adaptor Options”

5. Double click the ethernet adaptor, select “Properties on the open window:

6. Select IPV4 and properties

7. Select “Use following IP address” and enter details below

Press “Ok” then “Close” on previous window.

8. Open Microsoft Edge and browse to 192.168.2.66

9. Once rebooted, login again.

10. Select “Settings”

11. Ensure Operating Mode is set to “Station”

12. Click on orange cog at bottom right